SYNTECH
    Back to Academy
    Video tutorial

    Full product traceability in SYNTECH Manufacturing

    Serial numbers, certificates, production operations, and quality control in a single digital product passport

    Key steps

    The demonstration shows SYNTECH Manufacturing based on Creatio using the production of a PK-1 collimator sight as an example. Follow the stages below to review the serial product’s identity, component composition, production route, measured quality results, and product passport. Together, these records provide the history behind incoming, operational, and final quality control.

    1. Identify the serial product and its current stage

    1. Scan the product label to open its record and review the serial number, batch, and status shown there. The demonstration presents scanning as the entry point into the history of an individual product. Start with these identifiers so that the component, operation, and quality information you examine belongs to the same serial product.
    2. Check the current production status before treating the record as the history of a finished item. The product shown in the video is still at the electronic assembly stage, even though the demonstration also explains the path to a finished product. This distinction matters when reading a record that follows a product through production.
    3. Follow the same serial number through the stages from the housing to the finished product. The video explains that the label is printed again at each step, and the article identifies the labels as carrying DataMatrix. Use this continuity of identity to connect the successive production stages rather than viewing each label as a separate product.

    2. Review component composition and incoming-quality information

    1. Examine the product composition to see the components associated with the serial product. Review each component’s serial number, batch, supplier, and certificate, all of which are described in the demonstration. These details provide the component-level information behind the product history and support tracing from the finished product back to its constituent parts.
    2. Review supplier-batch and certificate information alongside the component identifiers when examining the incoming-quality part of the history. The article describes a product passport covering incoming, operational, and final quality control, with serial numbers and certificates for each component. Keep those references connected to the component being reviewed, rather than considering the certificate separately from the product composition.
    3. Look at the replacement included in the demonstrated composition and note that it was deliberately made, recorded, and approved. Read it as part of the actual component history of this serial product. Including the replacement in your review matters because the demonstrated traceability covers the registered change as well as the other components.

    3. Read the production route and individual time records

    1. Review the production route operation by operation, noting the work center associated with each step. The video shows operations, work centers, performers, and recorded time together in the route. Reading these details together helps explain how the serial product moved through production, rather than relying only on its current status or component list.
    2. Check who performed each operation and read the recorded time associated with that work. The article explicitly describes the route as showing who performed each operation and how long it took. This adds the execution history to the component history, giving a fuller account of what happened to the individual product during production.
    3. Pay particular attention to operations with more than one performer. In the demonstration, Kovalchuk and Hrynchuk both worked on each of two operations, and each person has their own recorded time. Read those individual entries separately so that the review preserves the distinction between the two performers’ contributions within the same operation.

    4. Examine measured quality-control results

    1. Review the quality-control information as measured values, not just as a general statement that the product is within tolerance. The sources describe insulation resistance, supply voltage, and aiming accuracy among the quality measurements. Read these results as part of the serial product’s history alongside its composition and production route, keeping the quality evidence connected to the item.
    2. For insulation resistance, compare the demonstrated measurement of 62 megohms with the stated range of 10 to 100 megohms. The measured value lies within that range, as the video explains. This example shows how a recorded measurement and its tolerance provide a more specific account of the check than a result without the measured value.
    3. Review aiming accuracy as another measurement described as being within tolerance, and include supply voltage when reviewing the checks listed in the article. The supplied text does not give numerical values for either of those measurements. Keep that distinction clear: the sources identify the checks and their tolerance outcome without providing the same numerical detail as the insulation-resistance example.

    5. Review and print the finished product passport

    1. Review the product passport as the document bringing together the serial product’s traceability information. The article describes component serial numbers and certificates, operation performers, and measured quality-control values as part of that passport. Consider these elements together to understand the product history across incoming, operational, and final quality control, rather than reading each area in isolation.
    2. For the finished product, print the completed passport using the one-click printing described in both sources. The video states that this document goes to the customer together with the product. Keep this finished-product handover separate from the electronic assembly status of the item shown earlier, which is explicitly described as still in production.
    3. Use the serial product record to trace from components to the finished product and back when reviewing its history. The demonstration describes traceability in seconds on any device, while the article highlights industries with high traceability requirements, including defense and precision instrumentation. The key review remains the same: connect the product identity, actual components, production work, and quality measurements.
    Transcript

    One product, one serial number. From every component to the finished product and back at any moment.

    Scanning the label immediately opens the product record, serial number, batch, and status. The composition shows every component, serial number, batch, supplier, and certificate, including one deliberate replacement that was recorded and approved.

    The route shows every operation, work center, performers, and recorded time. Two people worked on each of two operations, Kovalchuk and Hrynchuk, each with their own recorded time.

    Quality control with measured values. Insulation resistance is 62 megohms, within the range of 10 to 100. Aiming accuracy is also within tolerance.

    The same serial number passes through the stages from the housing to the finished product, and the label is printed again at every step, while this product is still on its way, at the electronic assembly stage.

    The completed product passport is printed with one click and goes to the customer along with the product. Traceability for every product in seconds on any device. Request a demonstration of SYNTECH Manufacturing on our website.

    SYNTECH Manufacturing based on Creatio forms a product passport with full incoming, operational, and final quality control: serial numbers and certificates for each component, who performed the operation, measured QC values within tolerance. The passport is printed with one click.

    Live demo using the example of producing the PK-1 collimator sight:
    — full product composition: each component with a serial number, supplier batch, and certificate, including one registered replacement;
    — production route: who performed each operation and how long it took;
    — quality control with measured values (insulation resistance, supply voltage, aiming accuracy) within tolerances;
    — labels with DataMatrix at each step;
    — printing the finished product passport with one click - the document immediately goes to the customer.

    For industries with high traceability requirements (defense industry, precision instrumentation) — a complete history of a serial product in seconds in one system.

    Website

    Comments & questions

    Sign in or register to leave a comment or question.

    Sign in / Register
    …