SYNTECH
    Back to Academy
    Video tutorial

    What a full drone production cycle looks like at Syntech Manufacturing

    From specification and MRP to warehouse, quality control, traceability, and shipment in a single digital loop

    Key steps

    The video follows drone production in SYNTECH Manufacturing from the product specification through acceptance and shipment. Use the stages below to follow how planning, materials, shop-floor work, quality records, and management visibility connect within one controlled production cycle.

    1. Define the product and identify material requirements

    1. Start with the product catalog and specification. Use the drone’s specification as the component list for the production cycle, including the quantity of each component. This establishes what the product consists of and gives production planning the specification it needs to work from.
    2. Keep the specification revision traceable. Alongside the component quantities, retain the revision information described in the video. A drone specification is more than a list of parts: its revision must also be trackable so that the product definition remains part of the controlled cycle.
    3. Expand the specification through MRP. Use the production plan to see which components are missing and how many are needed. Review those shortages before they reach the shop floor, where the video places particular importance on knowing material requirements ahead of production work.

    2. Approve procurement and record warehouse handling

    1. Take the purchase request through approval. Follow the approval step shown between material planning and warehouse receiving. This keeps procurement within the same controlled production cycle rather than treating the purchase request as separate from the component requirements identified through MRP.
    2. Record the supplier batch and certificate at receiving. Capture these details for each component when materials are accepted into the warehouse. Receiving therefore establishes more than the arrival of parts: it also records the supplier batch and certificate associated with those components.
    3. Track putaway and subsequent movements. Record where received parts are placed, down to the storage bin, and retain the complete movement log. Use this warehouse information to see both where a part is located and the history of its movements within the production cycle.

    3. Prepare the operator and carry out the operation

    1. Check the equipment supporting each operation. Use working equipment with verified maintenance, as described in the video. Equipment condition and maintenance belong alongside the production operation, rather than outside the cycle that connects the specification, materials, shop-floor tasks, and completed product.
    2. Check the person’s qualification for the operation. Confirm that the person carrying out the work has a valid qualification for that specific operation. The video pairs this requirement with properly maintained equipment, making both the equipment and the qualified person part of the operation’s context.
    3. Work from the operator’s shift task. At the workstation, view the assigned task, start the operation with one touch, and immediately record its completion. This connects what the operator is expected to do with the actual execution recorded in the system during the production cycle.

    4. Record quality checks and assemble the product passport

    1. Enter measured values for every quality parameter. Record the actual measurements in quality control rather than treating the check only as a general statement that work is complete. The video explicitly describes values for each parameter, making those measurements part of the quality-control record.
    2. Wait for the inspection to be accepted. Do not move the operation forward before acceptance of the quality check. In the demonstrated cycle, quality control prevents further progression until that inspection is accepted, placing a defined control point between performing an operation and allowing it to proceed.
    3. Bring the product history together under its serial number. Use the product passport to unite components, routing, and quality checks for the individual drone. The passport can be printed with one click, while the history of the specific product remains accessible in the system.

    5. Record acceptance and control shipment

    1. Capture the decision in the acceptance report. Use the report to record the acceptance decision at this stage of the production cycle. Keep this step distinct from the earlier quality measurements: the video identifies the acceptance report as the record that must be signed before shipment can start.
    2. Sign the acceptance report electronically. Complete the electronic signature step described in the video before proceeding to shipment. The signed report is not simply an additional document in the sequence; its presence is a stated condition for starting the shipment process.
    3. Treat the signed report as the shipment prerequisite. Check that acceptance has reached the signed-report stage before expecting shipment to begin. The demonstrated control is explicit: without a signed acceptance report, shipment will not start, connecting the recorded acceptance decision directly to dispatch.

    6. Review the production cycle through shared records and metrics

    1. Review production status in real time. Use the management dashboard to see the production process rather than looking only at an individual operator’s task. The video presents this overview as management’s view of the same cycle that connects specifications, materials, operations, quality, acceptance, and shipment.
    2. View shop workloads, quality, and deadlines together. Review these production metrics on the single dashboard described in the video. Keeping them in one view gives management visibility across these aspects of production while operators continue to work from their own tasks in the system.
    3. Keep the individual product history in view. Alongside the overall production status, use the accessible history of a specific product and its serial-number-based passport. This preserves the distinction between understanding the factory’s current production picture and following the components, routing, and quality checks of an individual drone.
    Transcript

    One drone manufacturer. One production cycle, from specification to shipped order, controlled at every step.

    Product catalog and product specification. Each drone is a list of components with quantities and a revision that can be tracked.

    The production plan expands the specification through MRP and immediately shows what is missing and in what quantities, before the shortage reaches the shop floor.

    The purchase request goes through approval, and warehouse receiving records the supplier batch and certificate for each component.

    The warehouse knows exactly where every part is located, down to the storage bin, with putaway after receiving and a complete movement log.

    At the workstation, the operator sees their task for the shift, starts the operation with one touch, and immediately records its completion.

    Quality control enters the measured values for each parameter and does not allow the operation to proceed until the inspection has been accepted.

    The product passport brings everything together under one serial number: components, routing, and quality checks, and it can be printed with one click.

    Behind every operation is working equipment with verified maintenance and a person with a valid qualification for that operation.

    The acceptance report records the decision and is signed electronically, and shipment simply will not start without a signed report.

    Management sees the entire production process in real time: shop workloads, quality, and deadlines on a single dashboard.

    SYNTECH Manufacturing. From the drone specification to signed shipment: one factory, one controlled cycle. Request a demonstration today.

    Drone production is not just assembly. It involves dozens of interconnected processes that need to be controlled simultaneously.

    In this video, we show what this cycle looks like at Syntech Manufacturing.

    The system connects:
    — product catalog and product specifications;
    — planning via MRP;
    — procurement and material acceptance;
    — warehouse and internal movements;
    — tasks for operators;
    — quality control;
    — product passport and traceability;
    — equipment and its maintenance;
    — acceptance and shipment;
    — real-time production metrics.

    The manager sees the production status, the operator sees their tasks, and the history of a specific product remains accessible in the system.
    One factory. One production cycle. One digital loop.

    More about Syntech Manufacturing

    Comments & questions

    Sign in or register to leave a comment or question.

    Sign in / Register
    …